top of page
EZsalt Sensor 2.0 Set Up
-
Plug your EZsalt Sensor into power using the provided power supply.
-
Open Wi-Fi settings so you can see available networks.
-
​Tap on the EZsalt Wi-Fi Network to connect
-
Open a browser (chrome, internet explorer) and into the address bar type, 192.168.4.1 and press enter.
-
A portal will open where you can select your network and enter the password. Check the box next to "WiFi Password" to see the password you've typed.
​6. After successfully connecting your sensor to Wi-Fi, you will be redirected to www.ezsaltgo.com where you can create an account.
7. Enter the tank depth. This is the height of your brine tank. Take a measurement from the ground, to the lid to find this value.
8. Set offset to 0% (you can change this later)
9. Set your Alert %. This is the level that you will be alerted at when the salt reaches it. (We recommend 30%)
10. Check, "Notify sensor owner" to receive alerts.
11. Tap, "Save"
12. Make sure to verify your email!
bottom of page