.png)
How to connect an EZsalt Sensor to Wi-Fi via the IP Address
Watch quick video showing how it works
Keep scrolling below to see detailed steps.
Step 1. Connect to "EZsalt" Network
Open your phone's settings, go to Wi-Fi networks, find a network named "EZsalt" and tap on it to connect.
Note: If you do not see an EZsalt Network showing. Hold the button on the sensor for 6 seconds then unplug and plug back in. You should see the light blinking slowly.
​
If on Android, you may get another popup letting you know the network does not have internet and asking if you want to stay connected. Make sure to say yes and stay connected.
.jpg)
Step 3. Connect to Wi-Fi
A page will open showing networks you can connect to. Tap on yours and enter your password below. Check the box next to "WiFi Password" to see the password you typed.
​
Once entered, click Save. Wait 10-20 seconds for the sensor to connect.
.jpg)
Step 3. Connect to Wi-Fi
A page will open showing networks you can connect to. Tap on yours and enter your password below. Check the box next to "WiFi Password" to see the password you typed.
​
Once entered, click Save. Wait 10-20 seconds for the sensor to connect.
Step 4. Add "Existing Sensor"
Open the EZsalt app and create an account or log in.
​
Once logged in, click the button "Add existing sensor".
Step 5. Add Sensor Details
Add the sensor ID (located on the back of 3.0 sensors), the tank depth, alert percentage, and affiliate/company ID (if applicable).
Step 6. Confirm Connected Sensor
Once you see the sensor reading, click the check mark button in the left-hand corner.
Step 7. Sync Sensor
After you have successfully connected the sensor, click the link "Sync with EZsaltGo".
​
You will now be able to see your salt level readings in the app.
